Technical characteristics
| Commercial Range | T5 AUTO+SHORT |
|---|---|
| Torque | 6 Nm |
| Unwrapped height | 63 mm |
| Unwrapped width | 63 mm |
| Power supply | AC - RGE 1 - 230V/50HZ |
| Speed | 17 rpm |
| Insulation class | Class I |
| Protection Index | IP 44 |
| Diameter | 50 mm |
| Unwrapped length | 383 mm |
| Minimum internal diameter | 47 mm |
| Type | Motors |
| Application | Rolling shutter |
| Embedded Technologies | Wired |
| Consumption in standby mode | 0.36 W |
Compatibility & Applications
-
Wired
-
Rolling shutter
Description
STAR MOTOR HEAD:
360° rotatable, this new actuator head is 100% compatible with the star-shaped brackets of the market.
MOTOR SUITABLE FOR SHORT WIDTH ROLLER SHUTTER:
Thanks to its length of only 383mm, including the adaptor set.
AUTOMATIC SETTING OF THE UP AND DOWN END-LIMITS:
The roller shutter must be equipped with up and down stoppers.
AN AUTO-ADAPTIVE DISTRESSING FUNCTION AT END-LIMITS (UP AND DOWN):
To suit at all end-products.
STOP ON OBSTACLE FUNCTION:
The motor stops during the closing in the case of an obstacle.
FROST DETECTION FUNCTION:
The motor stops during the opening if the shutter curtain is stuck in the guide rails by frost or if the bottom lath is locked.
PERMANENT READJUSTMENT OF END-LIMITS:
Thanks to of the constant auto-learning and revision of the up and down end-limit positions. It adapts thus to the variation in length of the shutter curtain over time.