Autosun 2

triptik_autosun2THE SOLAR SOLUTION 100% AUTONOMOUS, WITHOUT WORK

System operating with solar energy for facade or roof roller shutters.

  • Autonomous motorization system for roof and facade roller shutters, operating with solar energy, a free, clean and renewable energy.
  • No wiring: AUTOSUN 2 does not need to be connected neither to the electrical network nor to control points (SIMU-Hz radio technology), which means no degradation of interior walls.
  • Optimized outputs: AUTOSUN 2 has been designed to run in most geographical area.
  • Autonomy of the system: 45 days without sun, 2 cycles per day.

 Complete system with:

  • New T3.5 E Hz DC motor:
    • Connected to the battery and uses its energy to operate the shutter
    • Controlled by all SIMU radio control SIMU-Hz technology (sequential and functional)
    • Available in 3, 6 and 10 Nm
    • Stop on obstacle and frost detection system, speed variation
    • User’s favorite position
  • 3 choices of battery:
    • Stores the energy
    • Connected to the solar panel and the motor
    • Is fixed by bonding or by using specific clamps
    • Can be reloaded with a battery charger
  • 2 choices of solar panels:
    • Converts solar energy into electrical energy
    • Is fixed on the roller shutter box with pop rivets, tape or even deported with specific brackets

TECHNICAL DOCUMENTATION AND TUTORIALS

Commercial video

Installationguide_t3.5_ehz_dc_-_5136882a

Technical Doc Autosun_2

Tutorials on Youtube